TRUTH JAPAN Trick Star 642
TRUTH JAPAN Trick Star 642
TRUTH JAPAN Trick Star 642
TRUTH JAPAN Trick Star 642
TRUTH JAPAN Trick Star 642

TRUTH JAPAN Trick Star 642

Sale priceDhs. 2,211.00 AED
Sold out
Pickup currently unavailable at North Willoughby

TRUTH JAPAN Trick Star 642

North Willoughby

Pickup currently unavailable

340 Penshurst Street
North Willoughby NSW 2068
Australia

+61466333450
The most delicate model in the Trick Star series.
In recent years, perhaps due to the weakening of tidal pressure, situations where traditional sharp and aggressive initial actions—such as quick, snappy movements—no longer trigger strikes have become more common.
The Trickster 642 is designed to deliver a more natural and delicate action under such conditions.
Ideal for spring amberjack jigging and yellowtail jigging, and it performs exceptionally well in various fields throughout Japan.

Lengh : 6ft 4inch
Reel:STELLA SW 6000H / 8000PG HG、SALTIGA 8000P H
Jig : 80-230g
PE : up to PE3


Guide thread specifications

Guides: Titanium-frame SiC guides
T-MNSG8 / T-KTSG8 / T-KTSG10 / T-KLSG12 / T-KLSG16 / T-KLSG30

SiC rings are used to withstand repeated jigging motions and the intense fights typical of targeting large pelagic species.
All guides are single-foot to ensure that the blank’s natural bend is not hindered.
Under-wrapping is applied up to the third guide from the bottom, providing sufficient strength and durability.

The thread specification is an all-black finish.

Grip specifications

For the reel seat, we based the design on the DPSSD18IC body and equipped it with LOGR/AN lock nuts.
Like the TS643 and TS624, this model features a fully through one-piece construction that extends all the way to the grip end. In addition, to provide a softer jig action, the rod is tuned so that the entire blank can be used for manipulation and to absorb the fish’s movements. As a result, it exhibits a smooth bend from the reel seat to the rear grip.

However, during test fights we observed a tendency for the reel seat to flex and for the seat nut to loosen. To prevent this, we adopted the current specification, improving reliability so anglers can fight fish with greater confidence.
(For the TS643 and TS624 models, the conventional LD long nut provides sufficient locking performance, so they can be used without concern.)

Since the front grip is not typically held when using rods in this class, we adopted an 80 mm short grip that balances both design and functionality.



Specification

Length(m) Pieces Length(cm) Weight(g) Tip/Butt(mm)

Jig Weight

PE
6ft4inch 1 194cm 167g 1.9mm / 7.5mm jig - 80 - 230g  up to PE3